Gripset 51

GRIPSET 51 is a solvent-free bitumen rubber liquid membrane that has excellent sealing and adhesion properties over a number of common building surfaces. Gripset 51 is a versatile and economical membrane system suitable for both new and existing construction for underground and external areas. In addition to its excellent membrane properties, Gripset 51 can also be used as a protective coating for timber and metal surfaces. 

• Solvent free, non-toxic and non-flammable

• Flexible, accommodating normal substrate movement

• Ability to withstand continuously damp environments

• Good crack bridging properties

• High adhesion properties to porous and non-porous surfaces

• Protective coating against corrosion, rot and salt damp

• Bonds to asphalt/ bitumen surfaces, ideal for repair of failed aged coatings

• Compatible with cement for waterproofing slurries and mortars

• User and environmentally safe

• Excellent sound-deadening properties 

• Retaining walls and underground surfaces

• External cellar and basement walls

• Planter boxes and garden beds

• Gutter repairs

• Protective coating over metal and timber surfaces

IMPORTANT: When exposed to long-term UV, surface crazing may occur 

• Concrete, render and masonry

• Compressed fibre cement sheeting

• Marine ply, timber sheeting and timber posts

• Galvanised iron and zincalume (not raw steel)

• Bituminous and asphalt substrates

• Polystyrene

For further information and advice on surface/substrate suitability and preparation contact RLA Technical department 

Coverage
• Gripset 51 is to be installed in line with current edition, relevant volume and sections of the NCC (National Construction Code of Australia) pertaining external and general waterproofing applications within the scope of use for the product • Product is to be applied by brush or medium nap roller • Apply a minimum of 2 coats at a total minimum coverage of 1.5 litres/m² to form a 1mm dried film thickness • Apply subsequent coats at different directions to the previous coat. • A wet film gauge should be used to regulate correct coverage of each coat. Note: Coverage is dependent upon surface condition and will vary accordingly as uneven and porous surfaces will require greater coverage to achieve the specified film thickness.  

Dry Times
Re-coat: 2-4 hours Dry film: 24 hours Backfilling 5 days Flood test: 10 days Important: Drying times are based on ambient temperatures @ 23°C and 50% RH. Drying times may vary subject to ambient/surface temperatures, humidity and substrate porosity. Drying/curing times will be extended in cooler conditions and periods of high relative humidity 

Colour
Wet form: Charcoal Dry: Black

Packaging
5 and 15 Litre pails 

Buy Online